Sunday, September 5, 2010

autoboot fails in Netapp FAS3140

ISSUE:

The auto boot fails while booting to  boot image.

Boot Loader version 1.6.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2009 NetApp

CPU Type: Dual-Core AMD Opteron(tm) Processor 2216


Starting AUTOBOOT press Ctrl-C to abort...
Loading x86_64/kernel/primary.krn:..............0x200000/45505032 0x2d65a08/1765
0688 0x3e3ae08/6194359 0x44232bf/1 Entry at 0x00202018
Starting program at 0x00202018
Press CTRL-C for special boot menu

LOGS

While running Boot_diags  in CFE  Prompt we are getting below mention error

loader>boot_diags

PANIC: PCI Error NMI from device(s): NVRAM7 on motherboard. HT2000(1)
FATAL - EXB(0,9,0): SecStatus(RcvSysErr), RootErr(UCor,FUCFT,Fatal);
Dv[0009](9,0,0): Status(RcvSysErr). in process idle_thread0 on release
NetApp Release 7.3.2 on Mon Aug 30 19:31:17 GMT 2010


Solution:

NVRAM Replaced and its working fine.
Posted by Kesavan Unix & Storage Specalist at 11:28 PM

3 comments:

  1. AnonymousFebruary 25, 2012 at 3:39 AM

    NVRAM is built into MB, MB was replaced or NVRAM DDR module was.

    ReplyDelete
  2. AnonymousApril 4, 2012 at 5:19 AM

    This is showing up a little more often, and you have to replace the MB usually but sometimes just the DIMM replaced works too. Try DIMM then MB but send BOTH parts.

    ReplyDelete
  3. AnonymousOctober 10, 2024 at 10:07 PM

    Respect and I have a dandy give: What Is House Renovation house renovation training

    ReplyDelete

Subscribe to: Post Comments (Atom)